Wardrobe wall cabinets store large amounts of clothing in an organized manner.
A wardrobe wall cabinet is the perfect storage option when closet space is limited. With some craftsman skills, you can create the perfect wardrobe wall cabinet in a short amount of time that is sure to suit all of your storage needs. Does this Spark an idea?
Instructions
1. Set on the floor, side-by-side on the narrow edge, two 59-by-24-inch deep sections of plywood. Place one 48-by-24-inch deep section along the top and bottom edges of the 59-by-24 inch sections forming an oblong shape.
2. Drive in one screw every 6 inches along each edge to join the 59-by-24-inch side sections to the 48-by-24-inch sections.
3. Place one 48-by-60 inch wood section over the frame, aligning the four edges of the frame to the four edges of the 48-by-60 inch section. Drive in one screw every 6 inches around the perimeter.
4. Starting at the edge, measure in 12-inches in at each corner of 60-inch length piece on the remaining two 24-by-60-inch sections of plywood. Attach a hinge at each location using the 1/2-inch screws. You will want to place the hinges on the inside of the plywood so it is not visible from the outside of the wardrobe cabinet.
5. Lay the frame on a flat surface with open side facing up and lay both 24-by-60-inch sections side-by-side on top of the frame, aligning the outer edges of the frame to the outer edges of the doors. Measure 12-inches down and mark the spot on the door sections. The markings should align with the previously measured ones on the cabinet frame. Screw in the hinges to the inner edges of the wardrobe frame using 1/2-inch screws. Stand the wardrobe cabinet upright next to a wall.
Tags: 24-by-60-inch sections, 2-inch screws, 48-by-60 inch, cabinet frame, Drive screw, Drive screw every, edges frame