California Closets are custom-made to suit your clothing-storage needs.
The California Closets line of custom storage solutions adapts to various configurations. The closets have a simple structure, one based on vertical sections that hang from a tempered-steel railing. While a California Closets expert helps you design your closet before installation, modifying the closet after to match new needs simply requires pulling a piece loose, moving pegs, and sliding everything back together the way you want it. Does this Spark an idea?
Instructions
Shelves
1. Lift the shelf up from the pegs it's resting on and pull it free.
2. Remove the four pegs and stick them into the vertical section's peg-holes in a new location in the California Closet.
3. Slide the shelf between the vertical components and set it gently down onto the pegs.
Clothing Rods
4. Pull the wooden dowel up and out of its end-piece connectors.
5. Slip the plastic end-pieces out of the peg-holes and reposition them elsewhere in the California Closet, keeping the two ends at the same height.
6. Snap the rod back into place.
Drawers
7. Pull the drawer all the way out. Lift it up and slide it free of the rail to remove it.
8. Unscrew the drawer rails from the peg-holes and re-install them in a new location in the California Closet.
9. Slide the drawer back onto its rails. Set the back end down first, and then push it both down and inward until it rests securely on the track.
Tags: California Closets, California Closet, California Closet Slide, Closet Slide, location California, location California Closet
