Organizing toys, shoes and books can be a daily. Closetmaid Cubeicals offer a stackable storage system for the everyday items in your home. With fabric storage bins that fit inside the 11.00 inch high-by-10.50 inches-wide by- 10.50 inches in depth cubes, putting the Cubeicals together is the first step in organizing your home. Does this Spark an idea?
Instructions
1. Separate each of the fastener sets and place them in an area where you will have quick access. There are 20 5 millimeter-by-38 millimeter screws "AA", 20 screw plugs "BB", two hole plugs "CC", eight long dowels "DD", 10 short dowels "EE", 60 nails "FF", one half inch screw "GG", one 1.5 inch screw "HH" and one I-bracket "II".
2. Lay one "B" panel with the side which has six holes face up. Push an "EE" dowel into each of the four top and bottom holes in each line.
3. Stand the "B" Panel with the front finished side of the panel facing up. Attach one "A" panel to the "B" panel with two "AA" screws.
4. Attach one "D" panel to the "B" where one set of the dowels are. Use an "AA" screw to secure the "D" panel using one of the holes located on the top side of the "B" panel with two holes. Repeat the same process to attach another "D" divider to the other area on the "B" panel.
5. Turn the Cubeicial, so that the "B" panel is screw-side down. Place a "DD" dowel into each of the outside holes of the "D" dividers.
6. Place a "C" panel onto the dowels in the "D" dividers. Use two "AA" screws to attach the "C" panel using the holes located on the "A" panel.
7. Place two more "D" dividers on the dowels protruding from the "C" panel. Place a "DD" dowels in each of the outside holes in the "D" dividers you just installed. Use two "AA" screws to attach the second "C" panel, using the holes located on the "A" panel.
8. Place the remaining two "D" dividers onto the dowels protruding from the "C" panel. Place an "EE" dowel into the holes on the "D" dividers. Place the remaining "B" panel with the side of the "B" panel with four holes facing up.
9. Use two "AA" screws to attach the "B" panel to the "D" dividers using the holes on the top side of the "B" panel. Use two "AA" screws to attach the "A" panel to the "B" panel.
10. Place the Cubeical with the "A" panel with the screws facing down. Place the remaining "A" panel onto the Cubeical parallel to the "A" panel that is on the ground. Use eight "AA" screws to attach the "A" panel to the Cubeical using the holes on the "A" panel.
11. Lay the Cubeical with the "A" panels vertical and the "B" and "C" panels horizontal, finished side down.
12. Cover the exposed screws with the 20 "BB" screw plugs.
13. Use 12 "FF" nails each to attach an "E" back panel to the top right, top left, middle, bottom right and bottom left cube.
14. Stand the cubical up with the "B" panels horizontal. Insert a "CC" plug into the exposed holes in the top of the "A" panels.
15. Push the cubical against the wall. Use a stud finder to locate a stud in the wall. Place the "II" bracket long-side facing up. Use a "GG" screw to attach the "II" bracket to the cubical and a "HH" screw to attach the bracket to a wall stud using a drill.
Tags: panel Place, using holes, panel with, screws attach panel, side panel, attach panel